Payment Menu v2

Recur

Setting up subscriptions and recurring payments.

Edit "Recur" on GitHub

Recur

A recur payment is a payment which uses a recurrenceToken generated through a previous payment in order to charge the same card or account at a later time.

As the name implies, these payments are used for transactions which happen on a recurring basis. Common use cases could be subscriptions for magazines, newspapers or streaming services.

Please note that you need to do a capture after sending the recur request. We have added a capture section at the end of this page for that reason.

Generating The Token

First, you need an initial transaction where the recurrenceToken is generated and connected. You do that by adding the field generateRecurrenceToken in the PaymentOrder request and set the value to true. The payer must complete the purchase to activate the token.

(Read more about deleting the recurrence token here.)

Initial Recur Request

The initial request should look like this:

Request 



1
2
3
4



POST /psp/paymentorders HTTP/1.1
Host: api.externalintegration.payex.com
Authorization: Bearer <AccessToken>
Content-Type: application/json;version=3.x/2.0      // Version optional for 3.0 and 2.0





1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101



{
    "paymentorder": {
        "operation": "Purchase",
        "currency": "SEK",
        "amount": 1500,
        "vatAmount": 375,
        "description": "Test Purchase",
        "userAgent": "Mozilla/5.0...",
        "language": "sv-SE",
        "generateRecurrenceToken": true, 
        "urls": {
            "hostUrls": [ "https://example.com", "https://example.net" ], 
            "completeUrl": "https://example.com/payment-completed",
            "cancelUrl": "https://example.com/payment-cancelled",
            "callbackUrl": "https://api.example.com/payment-callback",
            "termsOfServiceUrl": "https://example.com/termsandconditions.pdf"
        },
        "payeeInfo": {
            "payeeId": "5cabf558-5283-482f-b252-4d58e06f6f3b",
            "payeeReference": "AB832",
            "payeeName": "Merchant1",
            "productCategory": "A123",
            "orderReference": "or-123456",
            "subsite": "MySubsite", 
        },
        "payer": {
            "digitalProducts": false,
            "firstName": "Leia",
            "lastName": "Ahlström",
            "email": "leia@payex.com",
            "msisdn": "+46787654321",
            "payerReference": "AB1234",
            "shippingAddress": {
                "firstName": "firstname/companyname",
                "lastName": "lastname",
                "email": "karl.anderssson@mail.se",
                "msisdn": "+46759123456",
                "streetAddress": "string",
                "coAddress": "string",
                "city": "Solna",
                "zipCode": "17674",
                "countryCode": "SE"
            },
            "billingAddress": {
                "firstName": "firstname/companyname",
                "lastName": "lastname",
                "email": "karl.anderssson@mail.se",
                "msisdn": "+46759123456",
                "streetAddress": "string",
                "coAddress": "string",
                "city": "Solna",
                "zipCode": "17674",
                "countryCode": "SE"
            },
            "accountInfo": {
                "accountAgeIndicator": "04",
                "accountChangeIndicator": "04",
                "accountPwdChangeIndicator": "01",
                "shippingAddressUsageIndicator": "01",
                "shippingNameIndicator": "01",
                "suspiciousAccountActivity": "01",
            }
        },
        "orderItems": [
            {
                "reference": "P1",
                "name": "Product1",
                "type": "PRODUCT",
                "class": "ProductGroup1",
                "itemUrl": "https://example.com/products/123",
                "imageUrl": "https://example.com/product123.jpg",
                "description": "Product 1 description",
                "discountDescription": "Volume discount",
                "quantity": 5,
                "quantityUnit": "pcs",
                "unitPrice": 300,
                "discountPrice": 0,
                "vatPercent": 2500,
                "amount": 1500,
                "vatAmount": 375
            }
        ],
        "riskIndicator": {
            "deliveryEmailAddress": "olivia.nyhuus@payex.com",
            "deliveryTimeFrameIndicator": "01",
            "preOrderDate": "19801231",
            "preOrderPurchaseIndicator": "01",
            "shipIndicator": "01",
            "giftCardPurchase": false,
            "reOrderPurchaseIndicator": "01",
            "pickUpAddress": {
                "name": "Olivia Nyhus",
                "streetAddress": "Saltnestoppen 43",
                "coAddress": "",
                "city": "Saltnes",
                "zipCode": "1642",
                "countryCode": "NO"
            }
        }
    }
}
Required Field Type Description  
check paymentOrder object The payment order object.  
check operation string Determines the initial operation, defining the type of payment order created.  
check currency string The currency of the payment.  
check amount integer The transaction amount (including VAT, if any) entered in the lowest monetary unit of the selected currency. E.g.: 10000 = 100.00 SEK, 5000 = 50.00 SEK.  
check vatAmount integer The payment’s VAT (Value Added Tax) amount, entered in the lowest monetary unit of the selected currency. E.g.: 10000 = 100.00 SEK, 5000 = 50.00 SEK. The vatAmount entered will not affect the amount shown on the payment page, which only shows the total amount. This field is used to specify how much of the total amount the VAT will be. Set to 0 (zero) if there is no VAT amount charged.  
check description string The description of the payment order.  
check userAgent string The user agent of the payer. Should typically be set to the value of the User-Agent header sent by the payer’s web browser.  
check language string The language of the payer.  
  generateRecurrenceToken boolean true or false. Set to true if you want to generate an recurrenceToken for future recurring purchases.  
check productName string Used to tag the payment as Digital Payments v3.0. Mandatory for Digital Payments v3.0, either in this field or the header, as you won’t get the operations in the response without submitting this field.  
  implementation string Indicates which implementation to use.  
check urls object The urls object, containing the URLs relevant for the payment order.  
check hostUrls array The array of URLs valid for embedding of Swedbank Pay Seamless Views.  
check completeUrl string The URL that Swedbank Pay will redirect back to when the payer has completed their interactions with the payment. This does not indicate a successful payment, only that it has reached a final (complete) state. A GET request needs to be performed on the payment order to inspect it further. See completeUrl for details.  
  cancelUrl string The URL to redirect the payer to if the payment is cancelled, either by the payer or by the merchant trough an abort request of the payment or paymentorder.  
check callbackUrl string The URL that Swedbank Pay will perform an HTTP POST against every time a transaction is created on the payment order. See callback for details. For recurring transactions, the callback will only be sent for Trustly transactions, not card.  
check termsOfServiceUrl string The URL to the terms of service document which the payer must accept in order to complete the payment. HTTPS is a requirement.  
check payeeInfo object The payeeInfo object, containing information about the payee (the recipient of the money). See payeeInfo for details.  
check payeeId string The ID of the payee, usually the merchant ID.  
check payeeReference string A unique reference from the merchant system. Set per operation to ensure an exactly-once delivery of a transactional operation. Length and content validation depends on whether the transaction.number or the payeeReference is sent to the acquirer. If Swedbank Pay handles the settlement, the transaction.number is sent and the payeeReference must be in the format of A-Za-z0-9 and string(30). If you handle the settlement, Swedbank Pay will send the payeeReference and it will be limited to the format of string(12). All characters must be digits. In Invoice Payments payeeReference is used as an invoice/receipt number, if the receiptReference is not defined.  
  payeeName string The name of the payee, usually the name of the merchant.  
  productCategory string(50) A product category or number sent in from the payee/merchant. This is not validated by Swedbank Pay, but will be passed through the payment process and may be used in the settlement process.  
  orderReference string(50) The order reference should reflect the order reference found in the merchant’s systems.  
  subsite string(40) The subsite field can be used to perform a split settlement on the payment. The different subsite values must be resolved with Swedbank Pay reconciliation before being used. If you send in an unknown subsite value, it will be ignored and the payment will be settled using the merchant’s default settlement account. Must be in the format of A-Za-z0-9.  
  payer object The payer object containing information about the payer relevant for the payment order.  
  digitalProducts bool Set to true for merchants who only sell digital goods and only require email and/or msisdn as shipping details. Set to false if the merchant also sells physical goods.  
  firstName string The first name of the payer.  
  lastName string The last name of the payer.  
  email string The e-mail address of the payer. Will be used to prefill the Checkin as well as on the payer’s profile, if not already set. Increases the chance for frictionless 3-D Secure 2 flow .  
  msisdn string The mobile phone number of the Payer. Will be prefilled on Checkin page and used on the payer’s profile, if not already set. The mobile number must have a country code prefix and be 8 to 15 digits in length. 3-D Secure 2  
  shippingAddress object The shipping address object related to the payer. The field is related to 3-D Secure 2  
  firstName string The first name of the addressee – the receiver of the shipped goods.  
  lastName string The last name of the addressee – the receiver of the shipped goods.  
  streetAddress string Payer’s street address. Maximum 50 characters long.  
  coAddress string Payer’ s c/o address, if applicable.  
  zipCode string Payer’s zip code  
  city string Payer’s city of residence.  
  countryCode string Country code for country of residence.  
check billingAddress object The billing address object containing information about the payer’s billing address.  
  firstName string The first name of the payer.  
  lastName string The last name of the payer.  
  streetAddress string The street address of the payer. Maximum 50 characters long.  
  coAddress string The CO-address (if used)  
  zipCode string The postal number (ZIP code) of the payer.  
  city string The city of the payer.  
  accountInfo object Object related to the payer containing info about the payer’s account.  
  accountAgeIndicator string Indicates the age of the payer’s account.
01 (No account, guest checkout)
02 (Created during this transaction)
03 (Less than 30 days old)
04 (30 to 60 days old)
05 (More than 60 days old)		  
  accountChangeIndicator string Indicates when the last account changes occurred.
01 (Changed during this transaction)
02 (Less than 30 days ago)
03 (30 to 60 days ago)
04 (More than 60 days ago)		  
  accountChangePwdIndicator string Indicates when the account’s password was last changed.
01 (No changes)
02 (Changed during this transaction)
03 (Less than 30 days ago)
04 (30 to 60 days ago)
05 (More than 60 days old)		  
  shippingAddressUsageIndicator string Indicates when the payer’s shipping address was last used.
01(This transaction)
02 (Less than 30 days ago)
03 (30 to 60 days ago)
04 (More than 60 days ago)		  
  shippingNameIndicator string Indicates if the account name matches the shipping name.
01 (Account name identical to shipping name)
02 (Account name different from shipping name)		  
  suspiciousAccountActivity string Indicates if there have been any suspicious activities linked to this account.
01 (No suspicious activity has been observed)
02 (Suspicious activity has been observed)		  
check orderItems array The array of items being purchased with the order. Note that authorization orderItems will not be printed on invoices, so lines meant for print must be added in the Capture request. The authorization orderItems will, however, be used in the Merchant Portal when captures or reversals are performed, and might be shown other places later. It is required to use this field to be able to send Capture orderItems. Capture requests should only contain items meant to be captured from the order.  
check reference string A reference that identifies the order item.  
check name string The name of the order item.  
check type string PRODUCT, SERVICE, SHIPPING_FEE, PAYMENT_FEE DISCOUNT, VALUE_CODE or OTHER. The type of the order item. PAYMENT_FEE is the amount you are charged with when you are paying with invoice. The amount can be defined in the amount field below.  
check class string The classification of the order item. Can be used for assigning the order item to a specific product category, such as MobilePhone. Note that class cannot contain spaces and must follow the regex pattern [\w-]*. Swedbank Pay may use this field for statistics.  
  itemUrl string The URL to a page that can display the purchased item, product or similar.  
︎︎︎ imageUrl string The URL to an image of the order item.  
  description string A 40 character length textual description of the purchase.  
  discountDescription string The human readable description of the possible discount.  
check quantity number The 4 decimal precision quantity of order items being purchased.  
check quantityUnit string The unit of the quantity, such as pcs, grams, or similar. This is used for your own book keeping.  
check unitPrice integer The price per unit of order item, including VAT.  
  discountPrice integer If the order item is purchased at a discounted price. This field should contain that price, including VAT.  
check vatPercent integer The percent value of the VAT multiplied by 100, so 25% becomes 2500.  
check amount integer The transaction amount (including VAT, if any) entered in the lowest monetary unit of the selected currency. E.g.: 10000 = 100.00 SEK, 5000 = 50.00 SEK.  
check vatAmount integer The payment’s VAT (Value Added Tax) amount, entered in the lowest monetary unit of the selected currency. E.g.: 10000 = 100.00 SEK, 5000 = 50.00 SEK. The vatAmount entered will not affect the amount shown on the payment page, which only shows the total amount. This field is used to specify how much of the total amount the VAT will be. Set to 0 (zero) if there is no VAT amount charged.  
  riskIndicator array This optional object consist of information that helps verifying the payer. Providing these fields decreases the likelihood of having to prompt for 3-D Secure 2.0 authentication of the payer when they are authenticating the purchase.  
  deliveryEmailAdress string For electronic delivery, the email address to which the merchandise was delivered. Providing this field when appropriate decreases the likelihood of a 3-D Secure authentication for the payer.  
  deliveryTimeFrameIndicator string Indicates the merchandise delivery timeframe.
01 (Electronic Delivery)
02 (Same day shipping)
03 (Overnight shipping)
04 (Two-day or more shipping)		  
  preOrderDate string For a pre-ordered purchase. The expected date that the merchandise will be available. Format: YYYYMMDD  
  preOrderPurchaseIndicator string Indicates whether the payer is placing an order for merchandise with a future availability or release date.
01 (Merchandise available)
02 (Future availability)		  
  shipIndicator string Indicates shipping method chosen for the transaction.
01 (Ship to cardholder’s billing address)
02 (Ship to another verified address on file with merchant)
03 (Ship to address that is different than cardholder’s billing address)
04 (Ship to Store / Pick-up at local store. Store address shall be populated in shipping address fields)
05 (Digital goods, includes online services, electronic giftcards and redemption codes)
06 (Travel and Event tickets, not shipped)
07 (Other, e.g. gaming, digital service)		  
  giftCardPurchase bool true if this is a purchase of a gift card.  
  reOrderPurchaseIndicator string Indicates whether the cardholder is reordering previously purchased merchandise.
01 (First time ordered)
02 (Reordered).		  
  pickUpAddress object If shipIndicator set to 04, then prefill this with the payers pickUpAddress of the purchase to decrease the risk factor of the purchase.  
  name string If shipIndicator set to 04, then prefill this with the payers name of the purchase to decrease the risk factor of the purchase.  
  streetAddress string If shipIndicator set to 04, then prefill this with the payers streetAddress of the purchase to decrease the risk factor of the purchase. Maximum 50 characters long.  
  coAddress string If shipIndicator set to 04, then prefill this with the payers coAddress of the purchase to decrease the risk factor of the purchase.  
  city string If shipIndicator set to 04, then prefill this with the payers city of the purchase to decrease the risk factor of the purchase.  
  zipCode string If shipIndicator set to 04, then prefill this with the payers zipCode of the purchase to decrease the risk factor of the purchase.  
  countryCode string If shipIndicator set to 04, then prefill this with the payers countryCode of the purchase to decrease the risk factor of the purchase.  

Initial Recur Response

Response 



1
2
3



HTTP/1.1 200 OK
Content-Type: application/json; charset=utf-8; version=3.x/2.0
api-supported-versions: 3.x/2.0





1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39



{
    "paymentorder": {
        "id": "/psp/paymentorders/09ccd29a-7c4f-4752-9396-12100cbfecce",
        "created": "2020-06-22T10:56:56.2927632Z",
        "updated": "2020-06-22T10:56:56.4035291Z",
        "operation": "Purchase", 
        "state": "Ready", 
        "currency": "SEK",
        "amount": 1500,
        "vatAmount": 375,
        "description": "Test Purchase",
        "initiatingSystemUserAgent": "swedbankpay-sdk-dotnet/3.0.1",
        "language": "sv-SE",
        "availableInstruments": [
          "CreditCard", ],   
        "instrumentMode": false,
        "guestMode": false,
        "payer": {
        "id": "/psp/paymentorders/8be318c1-1caa-4db1-e2c6-08d7bf41224d/payers"
        },
        "orderItems": {
        "id": "/psp/paymentorders/09ccd29a-7c4f-4752-9396-12100cbfecce/orderitems"
        }
      },
      "operations": [  
        {
          "href": "https://api.payex.com/psp/paymentorders/222a50ca-b268-4b32-16fa-08d6d3b73224",
          "rel":"update-order",
          "method":"PATCH",
          "contentType":"application/json"
        },
        {
          "href": "https://api.payex.com/psp/paymentorders/222a50ca-b268-4b32-16fa-08d6d3b73224",
          "rel": "abort",
          "method": "PATCH",
          "contentType": "application/json"
        }
       ]
      }
Field Type Description
paymentOrder object The payment order object.
id string The relative URL and unique identifier of the paymentorder resource . Please read about URL Usage to understand how this and other URLs should be used in your solution.
created string The ISO-8601 date of when the payment order was created.
updated string The ISO-8601 date of when the payment order was updated.
operation string Purchase
state string Ready, Pending, Failed or Aborted. Indicates the state of the payment order. Does not reflect the state of any ongoing payments initiated from the payment order. This field is only for status display purposes.
currency string The currency of the payment order.
amount integer The transaction amount (including VAT, if any) entered in the lowest monetary unit of the selected currency. E.g.: 10000 = 100.00 SEK, 5000 = 50.00 SEK.
vatAmount integer The payment’s VAT (Value Added Tax) amount, entered in the lowest monetary unit of the selected currency. E.g.: 10000 = 100.00 SEK, 5000 = 50.00 SEK. The vatAmount entered will not affect the amount shown on the payment page, which only shows the total amount. This field is used to specify how much of the total amount the VAT will be. Set to 0 (zero) if there is no VAT amount charged.
description string(40) A 40 character length textual description of the purchase.
initiatingSystemUserAgent string The user agent of the HTTP client making the request, reflecting the value sent in the User-Agent header with the initial POST request which created the Payment Order.
language string sv-SE, nb-NO, da-DK, en-US or fi-FI.
recurrenceToken string The generated recurrence token if operation: recur or generaterecurrenceToken: true was used.
availableInstruments string A list of payment methods available for this payment.
implementation string The merchant’s Digital Payments implementation type. Enterprise or PaymentsOnly. We ask that you don’t build logic around this field’s response. It is mainly for information purposes, as the implementation types might be subject to name changes. If this should happen, updated information will be available in this table.
integration string The merchant’s Digital Payments integration type. HostedView (Seamless View) or Redirect. This field will not be populated until the payer has opened the payment UI, and the client script has identified if Swedbank Pay or another URI is hosting the container with the payment iframe. We ask that you don’t build logic around this field’s response. It is mainly for information purposes. as the integration types might be subject to name changes, If this should happen, updated information will be available in this table.
instrumentMode bool Set to true or false. Indicates if the payment is initialized with only one payment method available.
guestMode bool Set to true or false. Indicates if the payer chose to pay as a guest or not. When using the Payments Only implementation, this is triggered by not including a payerReference in the original paymentOrder request.
payer id The URL to the payer resource where information about the payer can be retrieved.
orderItems id The URL to the orderItems resource where information about the order items can be retrieved.
operations array The array of operations that are possible to perform on the payment order in its current state.

GET The Token

You can retrieve it by using the expand option when you GET your payment. The GET request should look like the one below, with a ?$expand=paid after the paymentOrderId. The response should match the initial payment response, but with an expanded paid field.

Request 



1
2
3
4



GET /psp/paymentorders/09ccd29a-7c4f-4752-9396-12100cbfecce/ HTTP/1.1
Host: api.externalintegration.payex.com
Authorization: Bearer <AccessToken>
Content-Type: application/json;version=3.x/2.0      // Version optional for 3.0 and 2.0

Performing The Recurring Purchase

When you are ready to perform the recurring purchase, simply add the recurrenceToken field to the paymentOrder request and use the token as the value. Your request should look like the example below, and the response will match the paymentOrder response from the initial purchase.

After The Recurring Purchase

Please remember that the recur request will reserve the amount, but not charge it. You will (i.e. when you are ready to ship purchased physical products) have to perform a Capture request later on to complete the recurring purchase. You can also Cancel it if needed.

Recur Request

Request 



1
2
3
4



POST /psp/paymentorders HTTP/1.1
Host: api.externalintegration.payex.com
Authorization: Bearer <AccessToken>
Content-Type: application/json;version=3.x/2.0      // Version optional for 3.0 and 2.0





1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61



{
    "paymentorder": {
        "operation": "Recur",
        "recurrenceToken": "7e6cdfc3-1276-44e9-9992-7cf4419750e1",
        "currency": "NOK",
        "amount": 1500,
        "vatAmount": 0,
        "description": "Test Recurrence",
        "userAgent": "Mozilla/5.0...",
        "language": "nb-NO",  
        "urls": {
            "callbackUrl": "https://example.com/payment-callback"
        },
        "payeeInfo": {
            "payeeId": "5cabf558-5283-482f-b252-4d58e06f6f3b"
            "payeeReference": "CD1234",
            "payeeName": "Merchant1",
            "productCategory": "A123",
            "orderReference": "or-12456",
            "subsite": "MySubsite",  
        },
        "payer": {
            "payerReference": "AB1234",
        },
        "orderItems": [
            {
                "reference": "P1",
                "name": "Product1",
                "type": "PRODUCT",
                "class": "ProductGroup1",
                "itemUrl": "https://example.com/products/123",
                "imageUrl": "https://example.com/product123.jpg",
                "description": "Product 1 description",
                "discountDescription": "Volume discount",
                "quantity": 4,
                "quantityUnit": "pcs",
                "unitPrice": 300,
                "discountPrice": 200,
                "vatPercent": 2500,
                "amount": 1000,
                "vatAmount": 250
            },
            {
                "reference": "I1",
                "name": "InvoiceFee",
                "type": "PAYMENT_FEE",
                "class": "Fees",
                "description": "Fee for paying with Invoice",
                "quantity": 1,
                "quantityUnit": "pcs",
                "unitPrice": 1900,
                "vatPercent": 0,
                "amount": 1900,
                "vatAmount": 0,
                "restrictedToInstruments": [
                    "Invoice-PayExFinancingSe"
                ]
            }
        ]
    }
}
Required Field Type Description
check payment object The payment object.
check operation object Recur.
check recurrenceToken string The created recurrenceToken if operation: Recur or generateRecurrenceToken: true was used.
check currency string The currency of the payment order.
check amount integer The transaction amount (including VAT, if any) entered in the lowest monetary unit of the selected currency. E.g.: 10000 = 100.00 SEK, 5000 = 50.00 SEK.
check vatAmount integer The payment’s VAT (Value Added Tax) amount, entered in the lowest monetary unit of the selected currency. E.g.: 10000 = 100.00 SEK, 5000 = 50.00 SEK. The vatAmount entered will not affect the amount shown on the payment page, which only shows the total amount. This field is used to specify how much of the total amount the VAT will be. Set to 0 (zero) if there is no VAT amount charged.
check description string A 40 character length textual description of the purchase.
check userAgent string The user agent of the payer. Should typically be set to the value of the User-Agent header sent by the payer’s web browser.
check language string sv-SE, nb-NO, da-DK, en-US or fi-FI.
check urls string The URL to the urls resource where all URLs related to the payment order can be retrieved.
  callbackUrl string The URL that Swedbank Pay will perform an HTTP POST against every time a transaction is created on the payment order. See callback for details. For recurring transactions, the callback will only be sent for Trustly transactions, not card.
check payeeInfo object The payeeInfo object, containing information about the payee (the recipient of the money). See payeeInfo for details.
check payeeId string This is the unique id that identifies this payee (like merchant) set by Swedbank Pay.
check payeeReference string A unique reference from the merchant system. Set per operation to ensure an exactly-once delivery of a transactional operation. Length and content validation depends on whether the transaction.number or the payeeReference is sent to the acquirer. If Swedbank Pay handles the settlement, the transaction.number is sent and the payeeReference must be in the format of A-Za-z0-9 and string(30). If you handle the settlement, Swedbank Pay will send the payeeReference and it will be limited to the format of string(12). All characters must be digits. In Invoice Payments payeeReference is used as an invoice/receipt number, if the receiptReference is not defined.
  receiptReference string(30) A unique reference to the transaction, provided by the merchant. Can be used as an invoice or receipt number as a supplement to payeeReference.
check payeeName string The payee name (like merchant name) that will be displayed when redirected to Swedbank Pay.
check productCategory string(50) A product category or number sent in from the payee/merchant. This is not validated by Swedbank Pay, but will be passed through the payment process and may be used in the settlement process.
check orderReference string(50) The order reference should reflect the order reference found in the merchant’s systems.
check subsite string(40) The subsite field can be used to perform a split settlement on the payment. The different subsite values must be resolved with Swedbank Pay reconciliation before being used. If you send in an unknown subsite value, it will be ignored and the payment will be settled using the merchant’s default settlement account. Must be in the format of A-Za-z0-9.
  payer string The payer object, containing information about the payer.
  payerReference string The reference to the payer from the merchant system, like e-mail address, mobile number, customer number etc. Also used in Payer Aware Payment Menu. Mandatory if generateRecurrenceToken, RecurrenceToken, generatePaymentToken or paymentToken is true.
  metadata object A unique reference from the merchant system. Set per operation to ensure an exactly-once delivery of a transactional operation. Length and content validation depends on whether the transaction.number or the payeeReference is sent to the acquirer. If Swedbank Pay handles the settlement, the transaction.number is sent and the payeeReference must be in the format of A-Za-z0-9 and string(30). If you handle the settlement, Swedbank Pay will send the payeeReference and it will be limited to the format of string(12). All characters must be digits. In Invoice Payments payeeReference is used as an invoice/receipt number, if the receiptReference is not defined.
check orderItems array The array of items being purchased with the order. Note that authorization orderItems will not be printed on invoices, so lines meant for print must be added in the Capture request. The authorization orderItems will, however, be used in the Merchant Portal when captures or reversals are performed, and might be shown other places later. It is required to use this field to be able to send Capture orderItems. Capture requests should only contain items meant to be captured from the order.
check reference string A reference that identifies the order item.
check name string The name of the order item.
check type string PRODUCT, SERVICE, SHIPPING_FEE, PAYMENT_FEE DISCOUNT, VALUE_CODE or OTHER. The type of the order item. PAYMENT_FEE is the amount you are charged with when you are paying with invoice. The amount can be defined in the amount field below.
check class string The classification of the order item. Can be used for assigning the order item to a specific product category, such as MobilePhone. Note that class cannot contain spaces and must follow the regex pattern [\w-]*. Swedbank Pay may use this field for statistics.
  itemUrl string The URL to a page that can display the purchased item, product or similar.
  imageUrl string The URL to an image of the order item.
  description string A 40 character length textual description of the purchase.
  discountDescription string The human readable description of the possible discount.
check quantity integer The 4 decimal precision quantity of order items being purchased.
check quantityUnit string The unit of the quantity, such as pcs, grams, or similar. This is used for your own book keeping.
check unitPrice integer The price per unit of order item, including VAT.
  discountPrice integer If the order item is purchased at a discounted price. This field should contain that price, including VAT.
check vatPercent integer The percent value of the VAT multiplied by 100, so 25% becomes 2500.
check amount integer The transaction amount (including VAT, if any) entered in the lowest monetary unit of the selected currency. E.g.: 10000 = 100.00 SEK, 5000 = 50.00 SEK.
check vatAmount integer The payment’s VAT (Value Added Tax) amount, entered in the lowest monetary unit of the selected currency. E.g.: 10000 = 100.00 SEK, 5000 = 50.00 SEK. The vatAmount entered will not affect the amount shown on the payment page, which only shows the total amount. This field is used to specify how much of the total amount the VAT will be. Set to 0 (zero) if there is no VAT amount charged.
  restrictedToInstruments array A list of the payment methods you wish to restrict the payment to. Currently Invoice only. Invoice supports the subtypes PayExFinancingNo, PayExFinancingSe and PayMonthlyInvoiceSe, separated by a dash, e.g.; Invoice-PayExFinancingNo. Default value is all supported payment methods. Use of this field requires an agreement with Swedbank Pay. You can restrict fees and/or discounts to certain payment methods by adding this field to the orderline you want to restrict. Use positive amounts to add fees and negative amounts to add discounts.

Capture

Captures are only possible when a payment has a successful Authorization transaction, naturally excluding one-phase payment methods like Swish and Trustly. They will be marked as a Sale transaction. Two-phase payment methods like card and Vipps however, require a Capture to be completed.

Please note that you have a maximum of 5 consecutive failed attempts at a capture. The payment will be locked after the fifth, and you need to contact us for further attempts.

In addition to full captures, it is possible to do partial captures of the authorized amount. You can do more captures on the same payment later, up to the total authorized amount. A useful tool for when you have to split orders into several shipments.

First off, you must request the order information from the server to get the request link. With this, you can request the capture with the amount to capture, and get the status back.

To capture the authorized payment, we need to perform capture against the accompanying href returned in the operations list. See the abbreviated request and response below:

Capture Request

Request 



1
2
3
4



POST /psp/paymentorders/09ccd29a-7c4f-4752-9396-12100cbfecce/captures HTTP/1.1
Host: api.externalintegration.payex.com
Authorization: Bearer <AccessToken>
Content-Type: application/json;version=3.0/2.0      // Version optional





1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41



{
    "transaction": {
        "description": "Capturing the authorized payment",
        "amount": 1500,
        "vatAmount": 375,
        "payeeReference": "AB832",
        "receiptReference": "AB831",
        "orderItems": [
            {
                "reference": "P1",
                "name": "Product1",
                "type": "PRODUCT",
                "class": "ProductGroup1",
                "itemUrl": "https://example.com/products/123",
                "imageUrl": "https://example.com/product123.jpg",
                "description": "Product 1 description",
                "discountDescription": "Volume discount",
                "quantity": 4,
                "quantityUnit": "pcs",
                "unitPrice": 300,
                "discountPrice": 200,
                "vatPercent": 2500,
                "amount": 1000,
                "vatAmount": 250
            },
            {
                "reference": "P2",
                "name": "Product2",
                "type": "PRODUCT",
                "class": "ProductGroup1",
                "description": "Product 2 description",
                "quantity": 1,
                "quantityUnit": "pcs",
                "unitPrice": 500,
                "vatPercent": 2500,
                "amount": 500,
                "vatAmount": 125
            }
        ]
    }
}
Required Field Type Description
check transaction object The transaction object.
check description string The description of the capture transaction.
check amount integer The transaction amount (including VAT, if any) entered in the lowest monetary unit of the selected currency. E.g.: 10000 = 100.00 SEK, 5000 = 50.00 SEK.
check vatAmount integer The payment’s VAT (Value Added Tax) amount, entered in the lowest monetary unit of the selected currency. E.g.: 10000 = 100.00 SEK, 5000 = 50.00 SEK. The vatAmount entered will not affect the amount shown on the payment page, which only shows the total amount. This field is used to specify how much of the total amount the VAT will be. Set to 0 (zero) if there is no VAT amount charged.
check payeeReference string A unique reference from the merchant system. Set per operation to ensure an exactly-once delivery of a transactional operation. Length and content validation depends on whether the transaction.number or the payeeReference is sent to the acquirer. If Swedbank Pay handles the settlement, the transaction.number is sent and the payeeReference must be in the format of A-Za-z0-9 and string(30). If you handle the settlement, Swedbank Pay will send the payeeReference and it will be limited to the format of string(12). All characters must be digits. In Invoice Payments payeeReference is used as an invoice/receipt number, if the receiptReference is not defined.
  receiptReference string(30) A unique reference to the transaction, provided by the merchant. Can be used as an invoice or receipt number as a supplement to payeeReference.
check orderItems array The array of items being purchased with the order. Note that authorization orderItems will not be printed on invoices, so lines meant for print must be added in the Capture request. The authorization orderItems will, however, be used in the Merchant Portal when captures or reversals are performed, and might be shown other places later. It is required to use this field to be able to send Capture orderItems. Capture requests should only contain items meant to be captured from the order.
check reference string A reference that identifies the order item.
check name string The name of the order item.
check type enum PRODUCT, SERVICE, SHIPPING_FEE, PAYMENT_FEE, DISCOUNT, VALUE_CODE or OTHER. The type of the order item.
check class string The classification of the order item. Can be used for assigning the order item to a specific product category, such as MobilePhone. Note that class cannot contain spaces and must follow the regex pattern [\w-]*. Swedbank Pay may use this field for statistics.
  itemUrl string The URL to a page that can display the purchased item, product or similar.
︎︎︎ imageUrl string The URL to an image of the order item.
  description string The human readable description of the order item.
  discountDescription string The human readable description of the possible discount.
check quantity number The 4 decimal precision quantity of order items being purchased.
check quantityUnit string The unit of the quantity, such as pcs, grams, or similar. This is used for your own book keeping.
check unitPrice integer The price per unit of order item, including VAT.
  discountPrice integer If the order item is purchased at a discounted price. This field should contain that price, including VAT.
check vatPercent integer The percent value of the VAT multiplied by 100, so 25% becomes 2500.
check amount integer The total amount including VAT to be paid for the specified quantity of this order item, in the lowest monetary unit of the currency. E.g. 10000 equals 100.00 SEK and 5000 equals 50.00 SEK.
check vatAmount integer The total amount of VAT to be paid for the specified quantity of this order item, in the lowest monetary unit of the currency. E.g. 10000 equals 100.00 SEK and 5000 equals 50.00 SEK.
check reference string A reference that identifies the order item.
check name string The name of the order item.
check type enum PRODUCT, SERVICE, SHIPPING_FEE, PAYMENT_FEE, DISCOUNT, VALUE_CODE or OTHER. The type of the order item.
check class string The classification of the order item. Can be used for assigning the order item to a specific product category, such as MobilePhone. Note that class cannot contain spaces and must follow the regex pattern [\w-]*. Swedbank Pay may use this field for statistics.
︎︎︎ itemUrl string The URL to a page that can display the purchased item, such as a product page
︎︎︎ imageUrl string The URL to an image of the order item.
︎︎︎ description string The human readable description of the order item.
︎︎︎ discountDescription string The human readable description of the possible discount.
check quantity number The 4 decimal precision quantity of order items being purchased.
check quantityUnit string The unit of the quantity, such as pcs, grams, or similar.
check unitPrice integer The price per unit of order item, including VAT.
︎︎︎ discountPrice integer If the order item is purchased at a discounted price. This field should contain that price, including VAT.
check vatPercent integer The percent value of the VAT multiplied by 100, so 25% becomes 2500.
check amount integer The total amount including VAT to be paid for the specified quantity of this order item, in the lowest monetary unit of the currency. E.g. 10000 equals 100.00 NOK and 5000 equals 50.00 NOK.
check vatAmount integer The total amount of VAT to be paid for the specified quantity of this order item, in the lowest monetary unit of the currency. E.g. 10000 equals 100.00 NOK and 5000 equals 50.00 NOK.

Capture Response

If the capture request succeeds, this should be the response:

Response 



1
2
3



HTTP/1.1 200 OK
Content-Type: application/json; charset=utf-8; version=3.0/2.0
api-supported-versions: 3.0/2.0





1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18



{
    "payment": "/psp/creditcard/payments/7e6cdfc3-1276-44e9-9992-7cf4419750e1",
    "capture": {
        "id": "/psp/creditcard/payments/7e6cdfc3-1276-44e9-9992-7cf4419750e1/captures/ec2a9b09-601a-42ae-8e33-a5737e1cf177",
        "transaction": {
            "id": "/psp/creditcard/payments/7e6cdfc3-1276-44e9-9992-7cf4419750e1/transactions/ec2a9b09-601a-42ae-8e33-a5737e1cf177",
            "created": "2020-06-22T10:56:56.2927632Z",
            "updated": "2020-06-22T10:56:56.4035291Z",
            "type": "Capture",
            "state": "Completed",
            "amount": 1500,
            "vatAmount": 375,
            "description": "Capturing the authorized payment",
            "payeeReference": "AB832",
            "receiptReference": "AB831"
        }
    }
}
Property Type Description
payment string The relative URL of the payment this capture transaction belongs to.
capture object The capture object, containing the information about the capture transaction.
id string The relative URL of the created capture transaction.
transaction object The object representation of the generic transaction resource, containing information about the current transaction.
id string The relative URL of the current transaction resource.
created string The ISO-8601 date and time of when the transaction was created.
updated string The ISO-8601 date and time of when the transaction was updated.
type string Indicates the transaction type.
state string Indicates the state of the transaction, usually initialized, completed or failed. If a partial has been done and further transactions are possible, the state will be awaitingActivity.
number integer The transaction number, useful when there’s need to reference the transaction in human communication. Not usable for programmatic identification of the transaction, where id should be used instead.
amount integer The transaction amount (including VAT, if any) entered in the lowest monetary unit of the selected currency. E.g.: 10000 = 100.00 SEK, 5000 = 50.00 SEK.
vatAmount integer The payment’s VAT (Value Added Tax) amount, entered in the lowest monetary unit of the selected currency. E.g.: 10000 = 100.00 SEK, 5000 = 50.00 SEK. The vatAmount entered will not affect the amount shown on the payment page, which only shows the total amount. This field is used to specify how much of the total amount the VAT will be. Set to 0 (zero) if there is no VAT amount charged.
description string A 40 character length textual description of the purchase.
payeeReference string A unique reference from the merchant system. Set per operation to ensure an exactly-once delivery of a transactional operation. Length and content validation depends on whether the transaction.number or the payeeReference is sent to the acquirer. If Swedbank Pay handles the settlement, the transaction.number is sent and the payeeReference must be in the format of A-Za-z0-9 and string(30). If you handle the settlement, Swedbank Pay will send the payeeReference and it will be limited to the format of string(12). All characters must be digits. In Invoice Payments payeeReference is used as an invoice/receipt number, if the receiptReference is not defined.
receiptReference string(30) A unique reference from the merchant system. It is set per operation to ensure an exactly-once delivery of a transactional operation. It is used to supplement payeeReference as an additional receipt number.

Capture Sequence Diagram 

sequenceDiagram
    participant Merchant
    participant SwedbankPay as Swedbank Pay

    rect rgba(81,43,43,0.1)
        activate Merchant
        note left of Payer: Capture
        Merchant ->>+ SwedbankPay: rel:capture
        deactivate Merchant
        SwedbankPay -->>- Merchant: Capture status
        note right of Merchant: Capture here only if the purchased<br/>goods don't require shipping.<br/>If shipping is required, perform capture<br/>after the goods have shipped.<br>Should only be used for <br>payment methods that support <br>Authorizations.
    end